From: Alan Casey <alan.casey5@mail.dcu.ie>
Date: Thu, 7 Apr 2005 14:03:44 +0000
Subject: [U-Boot-Users] CONFIG_SYS_CLK_FREQ
In-Reply-To: <9b7ca657050406232910114859@mail.gmail.com>
Message-ID: <41108D1A0014B480@hawk.dcu.ie>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi,

  I have not seen this configuration variable
  mentioned in the u-boot README file in the
  base directory(latest release) - can 
  CONFIG_SYS_CLK_FREQ be used for all platforms?? 
  
  Specifically i would like to use it or something  
  similar to allow me to set the clock frequency of 
  the ARM Core on the Integrator/CP to run at 140MHz
  (max. reliable).

  At the moment Linux appears to be defaulting
  to running at some slow default core clock 
  frequency on the platform (probably ~25MHz).

  Any info. appreciated,
  Regards,
  Alan.

>-- Original Message --
>From: Daniel Ann <ktdann@gmail.com>
>Reply-To: Daniel Ann <ktdann@gmail.com>
>To: Stefan Roese <sr@denx.de>
>Subject: Re: [U-Boot-Users] CONFIG_SYS_CLK_FREQ
>Cc: u-boot-users at lists.sourceforge.net
>Date: Thu, 7 Apr 2005 15:29:05 +0900
>
>
>On Apr 7, 2005 3:09 PM, Stefan Roese <sr@denx.de> wrote:
>> You have to use what _realy_ is used on your hardware. So check with
your
>> hardware designers, if they soldered a 33.0 MHz oscillator or a 33.333
>or...
>
>Thanks. Quick peak at the osc. it's got 33.000000 written on it :P
>
>-- 
>Daniel
>
>
>-------------------------------------------------------
>SF email is sponsored by - The IT Product Guide
>Read honest & candid reviews on hundreds of IT Products from real users.
>Discover which products truly live up to the hype. Start reading now.
>http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
>_______________________________________________
>U-Boot-Users mailing list
>U-Boot-Users at lists.sourceforge.net
>https://lists.sourceforge.net/lists/listinfo/u-boot-users