From: Steven Scholz <steven.scholz@imc-berlin.de>
Date: Tue, 23 Nov 2004 16:42:54 +0100
Subject: [U-Boot-Users] CONFIG_BOOTBINFUNC for AT91RM9200
In-Reply-To: <41A34505.4030209@imc-berlin.de>
References: <41A34505.4030209@imc-berlin.de>
Message-ID: <41A35A7E.1020605@imc-berlin.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Dear Wolfgang,

is there a standard way in U-Boot to prevent to the startup code from relocating 
into RAM?

I know that arm920t figures out the currebt address. compares it to _TEXT_BASE 
and decides wether to relocate or not.

relocate:				/* relocate U-Boot to RAM	    */
	adr	r0, _start		/* r0 <- current position of code   */
	ldr	r1, _TEXT_BASE		/* test if we run from flash or RAM */
	cmp     r0, r1                  /* don't reloc during debug         */


So there might be no need for a define like CFG_DONT_RELOCATE. But how about 
other cpus?

(I am asking cause you wrapped the relocate code in cpu/at91rm9200/start.S with 
CONFIG_BOOTBINFUNC instead of using the above technique.

Thanks,

Steven