From: =?ISO-8859-1?Q?Tiago_Bruno_Esp=EDrito_Santo_Silva?= List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lartc@vger.kernel.org Hello Every One! I need some advices with a problem i have. I'm working in a room from a department where the connection to the=20 Internet is given by a NAT router and the IPs are given by a DHCP server. There are no firewall in the department so i'm trying to make a Firewall=20 and a traffic shaper for all the PCs in my room. Because i don't have access to the DHCP server from my department and i=20 can not use a NAT in my room because all the IPs have to be public in=20 all the department, i have thought in use a Proxy ARP router with a=20 DHCRelay...BUT there are problems like i can=B4t predict what are the IPs=20 given by the DHCP server and i can not make routes in the router to say=20 that the IPs X, Y and Z are behind the router. So..It is possible to have a proxy arp router with a dhcrelay without=20 knowing what are the IPs given to my firewalled computers? The information i need i can see it when i make execute "arp -a" it=20 lists the MACs IPs and the device where they are. I add the routes by=20 hand, but How can i use it to update automatically the route table? Other problem, the DHCRelay works fine and it forwards all the DHCP=20 requests/replays BUT i don't know why the winXP clients DENIES the=20 replays and don't accept the IPs given. With the Linux BOXs there are no=20 problem. I saw it with ethereal. Thanks in advance. Tiago =20 _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/