From: Corey Hickey Date: Fri, 01 Apr 2005 05:19:01 +0000 Subject: Re: [LARTC] These tc commands used to work... what's broken them? Message-Id: <424CD9C5.1000801@fatooh.org> List-Id: References: <20050325220314.73F5D32AB1D@www.davidwhite.org> In-Reply-To: <20050325220314.73F5D32AB1D@www.davidwhite.org> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org George Adams wrote: > I have a Gentoo Linux (kernel 2.6.11) server. Several months ago, I > made a traffic shaping setup for my box (running a 2.4 kernel then) > that worked beautifully. It gave high priority to SSH and RealAudio > traffic, and put HTTP downloading traffic on a lower prio so they could > only use what bandwidth was left. > I'm not familiar with Gentoo or dsmark so I can only give you a very general answer. Someone else might know more. Try compiling iproute2 from http://developer.osdl.org/dev/iproute2/. You don't necessarily need to 'make install'; just test by running the new tc binary in the source tree. Try compiling a vanilla kernel from http://www.kernel.org/, if you aren't running one already. Try various combinations and see if you can find one that works. You want to determine if this is a Gentoo-specific problem. If it is, you should report your bug to the respective Gentoo package maintainer(s). If it isn't a Gentoo problem, you can report it upstream to whomever it concerns. -Corey _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc