From: =?ISO-8859-2?Q?Pawe=B3_Sklarow?= Date: Sat, 02 Apr 2005 12:51:25 +0200 Subject: [U-Boot-Users] PP440EP, problem with EMAC and MAL Message-ID: <424E792D.8080007@poczta.onet.pl> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello! I'm trying to port u-boot for Bamboo board (from AMCC). I have problem with run ethernet interface. Initialization of EMAC&PHY looks good, but I have problem with MAL. After receive data ppc440EP raises MAL error interrupt with cause "Buffer Descriptor Format Error" in first RX channel. I've checked pareters passed to MAL DRC's - it looks fine. I know that those errors could appear when "flag EMPTY in rx buffer desciptor is not set", but is set. Maybe is there an different reason: In AMCC documentation I've found information that buffer descriptor should be placed in non-cached memory or all descriptors area can's cross cache line size. In u-boot there is a mechanizm to provide not to cross cache line, so it looks that it'd be no cache problem. Maybe somebody was in similar troubles, and could help me? -- regards, Pawel Sklarow