From: rick at efn.org Date: Sat, 17 Feb 2018 11:29:29 -0800 (PST) Subject: [U-Boot] [PATCHv1] mx53ppd: Change UART clock divider for high baudrate In-Reply-To: <1727347183.49454544.1518895769103.JavaMail.zimbra@efn.org> References: <20180215161554.17616-1-sebastian.reichel@collabora.co.uk> Message-ID: <425132328.49454557.1518895769587.JavaMail.zimbra@efn.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de It's been ages since I've worked on this, let me refresh my memory and get back to you. Cheers, Rick From: "Fabio Estevam" To: "Sebastian Reichel" Cc: "Stefano Babic" , "Fabio Estevam" , "U-Boot-Denx" , "Rick Bronson" Sent: Saturday, February 17, 2018 9:42:47 AM Subject: Re: [U-Boot] [PATCHv1] mx53ppd: Change UART clock divider for high baudrate On Thu, Feb 15, 2018 at 2:15 PM, Sebastian Reichel wrote: > From: Rick Bronson > > Allow higher UART baud rates for communications to ACHC at 13.5 MBaud > Done in u-boot since it changes a divider common to all UARTs, including > the console. If it were done in Linux we would get garbled characters > during the handoff from u-boot to the kernel. A Signed-off-by from Rick is missing here. > Signed-off-by: Sebastian Reichel