From: ro0ot Date: Sun, 03 Jul 2005 16:25:32 +0000 Subject: Re: [LARTC] Loadbalancing how to ? ? ? ? Message-Id: <42C8117C.5050809@phreaker.net> List-Id: References: <42c6b55a.2b2713fa.0308.ffffb3a1@mx.gmail.com> In-Reply-To: <42c6b55a.2b2713fa.0308.ffffb3a1@mx.gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset="windows-1252" Content-Transfer-Encoding: quoted-printable To: lartc@vger.kernel.org Is it possible to combine the 2 or 4 ADSL line into 1 line (big pipe)? Regards, ro0ot Robert Kurjata wrote: >Witaj Cao, > >W Twoim li=9Ccie datowanym 2 lipca 2005 (17:40:05) mo=BFna przeczyta=E6: > >CVK> I have 2 ADSL ad1 and ad2 , one PC for my firewall and some >CVK> deamon on it with 3 ethernet : eth0 connect to my LAN ( > >This question comes and goes on this list :) > >Please read information at: http://www.ssi.bg/~ja/ , especially http://www= .ssi.bg/~ja/nano.txt >and you can try my script http://www.ssi.bg/~ja/tmp/mpath2.sh to >load balance 2 (or more - I was using 4) connections with great >success. No daemon needed :) > >There are also other solutions in list archive. > >IMHO the routing code has precedence over iptables so it chooses the >outgoing interface over which the iptables will SNAT in input routing >process. And thats why you will not see the effect in this setup (thi >interface has already been chosen). It is possible (and >reasonable) to SNAT to multiple IPs residing on one interface. > >Correct me if I'm wrong, please...:) > > =20 > _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc