From: Gerfried Maier Subject: Re: CPU - Power state (Cx) usage count not working Date: Wed, 01 Feb 2006 15:44:21 +0100 Message-ID: <43E0C945.7010007@sbox.tugraz.at> References: <43D491A5.6010000@sbox.tugraz.at> <1138012807.2948.9.camel@spitfire> <43D4C082.7060908@sbox.tugraz.at> <1138019639.30619.6.camel@littledragon> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Return-path: Received: from mailrelay.tu-graz.ac.at ([129.27.2.202]:24424 "EHLO mailrelay1.tu-graz.ac.at") by vger.kernel.org with ESMTP id S1161065AbWBAOo0 (ORCPT ); Wed, 1 Feb 2006 09:44:26 -0500 Received: from [129.27.123.23] (emapc23.tu-graz.ac.at [129.27.123.23]) by mailrelay1.tu-graz.ac.at (8.13.5/8.13.5) with ESMTP id k11EiOW5023914 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO) for ; Wed, 1 Feb 2006 15:44:24 +0100 (CET) In-Reply-To: <1138019639.30619.6.camel@littledragon> Sender: linux-acpi-owner@vger.kernel.org List-Id: linux-acpi@vger.kernel.org To: linux-acpi@vger.kernel.org Niko Ehrenfeuchter wrote: > >> On my system all _3 counters_ C1, C2 and C3 always stay at [00000000] >> and not only the C3 counter. > > ok, now that's much clearer... can you revert to the old kernel that > made use of the power states to check if it still works? I figured out, that the preemptive-patch from http://www.kernel.org/pub/linux/kernel/people/rml/preempt-kernel/v2.4/ is responsible for all the couters staying at [00000000]. With this patch not applied 2.4.31 works as expected. So, this was my fault at all. Sorry for bothering the list. > as far as i can see, the latest acpi patch for 2.4 is really old > (20040326), so i'd really recommend to try 2.6 I'm afraid that I can't use 2.6 because of annoyances with the nvidia X11-drivers. So I'm stuck to 2.4. moali