From: Luis R. Rodriguez Date: Mon, 11 May 2009 23:55:39 -0700 Subject: [ath9k-devel] ath9k module-Unable to set channel-since ath comes In-Reply-To: References: <43e72e890905101141r6fe3b655ta158acabf4c87ec3@mail.gmail.com> Message-ID: <43e72e890905112355t53537ca9w2797cfc8694302@mail.gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org On Mon, May 11, 2009 at 11:38 PM, wrote: > > Hello to linuxwireless > > thanks for response. The stabel compat-wireless-2.6.30-rc4.tar.bz2 release > works well. The bleeding edge compat-wireless works to but only till the new > submodule ath comes in live (compat-wireless-2009-04-12.tar.bz2 is the last > version which i have tasted and which works well). I've tested this and its not the "ath" module which introduces an issue its a patch which enables PS by default. You can disable that by recompiling with: CONFIG_MAC80211_DEFAULT_PS_VALUE=0 If using compat-wireless just stuff it into config.mk. Luis