From: Alberto Sala Date: Thu, 02 Mar 2006 10:40:42 +0100 Subject: [U-Boot-Users] problems transferring control to linux (ppc) Message-ID: <4406BD9A.4030005@icn.siemens.it> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi all, we are porting u-boot/linux to a custom board based on mpc8280. After having made u-boot-1.1.4 work, we tried booting some test-configured linux 2.6.15 kernels. If we start u-boot using Trace32 (lauterbach) all goes well and linux gets loaded, but if we do the same steps disconnecting Trace32, u-boot seems to work properly, but as soon as the control is transferred to linux all seems to be hanged, and the last words visible on the serial are: [...] ## Loading RAMDisk Image at 00400000 ... Image Name: Test Ramdisk Image Image Type: PowerPC Linux RAMDisk Image (gzip compressed) Data Size: 1374924 Bytes = 1.3 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## initrd at 0x00400040 ... 0x0054FB0B (len=1374924=0x14FACC) Loading Ramdisk to 07e4e000, end 07f9dacc ... OK ## Transferring control to Linux (at address 00000000) ... We are wondering if this is an issue involving u-boot or if this is related to linux config (in this case sorry for being off-topic). Thanks for any help!! Ciao, Alberto