From: r.marek@sh.cvut.cz (Rudolf Marek) Date: Mon, 13 Mar 2006 20:27:55 +0000 Subject: [lm-sensors] [PATCH] Add ATI smbus to PIIX4 Message-Id: <4415D5CB.1010506@sh.cvut.cz> List-Id: References: <4413E4B5.7010202@sh.cvut.cz> In-Reply-To: <4413E4B5.7010202@sh.cvut.cz> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org Hi, > Compiles fine, but I'd have the following comments: Good. > "N/A" usually stands for "not applicable", which isn't relevant here; > "Not publicly available" would be better. I always thought it is not avail... > > >>--- c-fixhstcfg/drivers/i2c/busses/Kconfig 2006-03-11 21:33:37.000000000 +0100 >>+++ d-add-ati/drivers/i2c/busses/Kconfig 2006-03-11 22:18:39.728756000 +0100 >>(...) >>- tristate "Intel PIIX4" >>+ tristate "Intel PIIX4/ATI/Serverworks/Broadcom" > > > This formulation is a bit confusing, as it suggests that ATI, > Serverwords and Broadcom are chips made by Intel ;) I'd go for "Intel > PIIX4 and compatible". Fixed > > >> If you say yes to this option, support will be included for the Intel >> PIIX4 family of mainboard I2C interfaces. Specifically, the following >>- versions of the chipset are supported (note that Serverworks is part >>- of Broadcom): >>+ versions of the chipset are supported: >> Intel PIIX4 >> Intel 440MX >>+ ATI IXP200 >>+ ATI IXP300 >>+ ATI IXP400 >>+ Broadcom HT-1000 >> Serverworks OSB4 >> Serverworks CSB5 >> Serverworks CSB6 >>- Serverworks HT-1000 >> SMSC Victory66 > > > Please back out the Serverworks vs. Broadcom changes. Not only I don't > see them as useful, but more importantly they don't belong to that > patch. OK, I thought bit tidy up can be done... > Otherwise the patch has all I wanted, thanks, good job. Tnx ;) This patch adds the ATI IXP southbridges support to i2c-piix4, as it turned out those chips are compatible with it. Signed-off-by: Rudolf Marek Regards, Rudolf -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: piix4_add_ati2 Url: http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20060313/2f60ea06/piix4_add_ati2.pl