From: Mogens Valentin Subject: Re: Gigabyte i-Ram cards Date: Thu, 23 Mar 2006 20:16:40 +0100 Message-ID: <4422F418.5050905@vip.cybercity.dk> References: <441F63E6.2090204@garzik.org> <44214F92.1080901@eventmonitor.com> <4421DDE2.60502@garzik.org> Reply-To: mogensv@vip.cybercity.dk Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from cicero2.cybercity.dk ([212.242.40.53]:64970 "EHLO cicero2.cybercity.dk") by vger.kernel.org with ESMTP id S932588AbWCWTNE (ORCPT ); Thu, 23 Mar 2006 14:13:04 -0500 Received: from user1.cybercity.dk (user1.cybercity.dk [212.242.41.34]) by cicero2.cybercity.dk (Postfix) with ESMTP id B19B8244DE2 for ; Thu, 23 Mar 2006 20:13:03 +0100 (CET) Received: from vip.cybercity.dk (port583.ds1-suoe.adsl.cybercity.dk [217.157.206.84]) by user1.cybercity.dk (Postfix) with ESMTP id 611E574F89D for ; Thu, 23 Mar 2006 20:13:03 +0100 (CET) In-Reply-To: <4421DDE2.60502@garzik.org> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: linux-ide@vger.kernel.org Jeff Garzik wrote: > Intel ICH boards can be driven using either the ata_piix or the ahci > driver, depending on BIOS mode. Most likely, when you switched to SATA > mode in BIOS, it started programming the motherboard to boot in > IDE-compatible mode (ata_piix) rather than SATA FIS mode (ahci). So, this could apply to Dell Dimension 9150 as well? I only have limited experience with Gentoo (used at work), so I'm not sure what's actually what as yet on those boxes. However, using stock BIOS setup, i.e. SATA mode, I couldn't install Slackware test26 (2.6 kernel), which use libata. Didn't have time to investigate further. -- Kind regards, Mogens Valentin