From: Marek Vasut Date: Mon, 12 Nov 2018 14:48:09 +0100 Subject: [U-Boot] Rockchip RV1108 eMMC initialization fail In-Reply-To: <1542014629432-0.post@n7.nabble.com> References: <1542014629432-0.post@n7.nabble.com> Message-ID: <4452ef4f-b191-e4b0-cc04-0b4384225d25@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 11/12/2018 10:23 AM, alex94 wrote: > Hi, > I am trying to use eMMC as a storage medium for my > custom board based on Rockchip RV1108. > > I have already made the changes as described in this thread: > > http://u-boot.10912.n7.nabble.com/Rockchip-RV1108-eMMC-support-not-working-td343843.html#a343866 > > about using eMMC with RV1108. > > When U-boot starts, and I try to access the eMMC, here is what I get: > > => mmc info > CMD_SEND:0 > ARG 0x00000000 > MMC_RSP_NONE > CMD_SEND:8 > ARG 0x000001AA > RET -110 > CMD_SEND:55 > ARG 0x00000000 > RET -110 How does the log look for an SD ? I suspect it's probably clock or pinmux that's broken. -- Best regards, Marek Vasut