From: Matt Ayres Subject: Re: Re: Panic in ipt_do_table with 2.6.16.13-xen Date: Thu, 18 May 2006 20:45:17 -0400 Message-ID: <446D151D.6030307@tektonic.net> References: <4468BE70.7030802@tektonic.net> <4468D613.20309@trash.net> <44691669.4080903@tektonic.net> <4469D84F.8080709@tektonic.net> <446D0A0D.5090608@tektonic.net> <446D0E6D.2080600@tektonic.net> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: Linux Kernel Mailing List , "xen-devel@lists.xensource.com" , Netfilter Development Mailinglist , James Morris , Patrick McHardy Return-path: To: Matt Ayres In-Reply-To: <446D0E6D.2080600@tektonic.net> List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , Sender: xen-devel-bounces@lists.xensource.com Errors-To: xen-devel-bounces@lists.xensource.com List-Id: netfilter-devel.vger.kernel.org Matt Ayres wrote: > > > James Morris wrote: >> On Thu, 18 May 2006, Matt Ayres wrote: >> >>>> I'm trying to suggest eliminating this driver & possible interaction >>>> with >>>> Xen network changes as a cause. If you can find a different type of >>>> NIC to >>>> plug in and use, or even try and change all of the params for the >>>> tg3 with >>>> ethtool, it'll help. >>>> >>> Hi, >>> >>> Thank you for the assistance. Which parameters do you suggest changing? >>> TSO/flow control off? >> >> Yep, anything. > > Ok, "ethtool -K eth0 rx off tx off sg off tso off" should have turned it > all off. > I think I confirmed the NIC is not the source of the problem. A few of my servers have e100/tulip NIC's due to a bug with the chipset of the on-board TG3 cards firmware and TSO. These servers that use the e100/tulip drivers also experience the ipt_do_table bug. Thanks, Matt