From: Larry Finger Subject: [PATCH] bcm43xx: further fix for periodic work errors Date: Fri, 22 Sep 2006 23:08:02 -0500 Message-ID: <4514B322.mail1K91A36N8@lwfinger.net> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Cc: netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Bcm43xx-dev-0fE9KPoRgkgATYTw5x5z8w@public.gmane.org, Michael Buesch , Stefano Brivio Return-path: To: John Linville List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: bcm43xx-dev-bounces-0fE9KPoRgkgATYTw5x5z8w@public.gmane.org Errors-To: bcm43xx-dev-bounces-0fE9KPoRgkgATYTw5x5z8w@public.gmane.org List-Id: netdev.vger.kernel.org Recent changes in the setup for preemptible periodic work fixed most of the problems with NETDEV watchdog timeouts; however, some variants of the bcm43xx device still had the problem. These were fixed by setting the parameter MAXIMUM_BADNESS to 0. By doing so, all the functionality associated with calculating the 'badness' of the upcoming periodic work is no longer needed; therefore it is removed. Signed-off-by: Larry Finger --- John, This patch relies on "[PATCH] bcm43xx: fix netdev watchdog timeouts", which was submitted on 9/14/06. It is important for this one, as well as those already queued, to make the 2.6.19 cutoff. Thanks, Larry Index: wireless-2.6/drivers/net/wireless/bcm43xx/bcm43xx_main.c =================================================================== --- wireless-2.6.orig/drivers/net/wireless/bcm43xx/bcm43xx_main.c +++ wireless-2.6/drivers/net/wireless/bcm43xx/bcm43xx_main.c @@ -3136,67 +3136,32 @@ static void do_periodic_work(struct bcm4 schedule_delayed_work(&bcm->periodic_work, HZ * 15); } -/* Estimate a "Badness" value based on the periodic work - * state-machine state. "Badness" is worse (bigger), if the - * periodic work will take longer. - */ -static int estimate_periodic_work_badness(unsigned int state) -{ - int badness = 0; - - if (state % 8 == 0) /* every 120 sec */ - badness += 10; - if (state % 4 == 0) /* every 60 sec */ - badness += 5; - if (state % 2 == 0) /* every 30 sec */ - badness += 1; - if (state % 1 == 0) /* every 15 sec */ - badness += 1; - -#define BADNESS_LIMIT 4 - return badness; -} - static void bcm43xx_periodic_work_handler(void *d) { struct bcm43xx_private *bcm = d; unsigned long flags; u32 savedirqs = 0; - int badness; - - badness = estimate_periodic_work_badness(bcm->periodic_state); - if (badness > BADNESS_LIMIT) { - /* Periodic work will take a long time, so we want it to - * be preemtible. - */ - mutex_lock(&bcm->mutex); - netif_tx_disable(bcm->net_dev); - spin_lock_irqsave(&bcm->irq_lock, flags); - bcm43xx_mac_suspend(bcm); - if (bcm43xx_using_pio(bcm)) - bcm43xx_pio_freeze_txqueues(bcm); - savedirqs = bcm43xx_interrupt_disable(bcm, BCM43xx_IRQ_ALL); - spin_unlock_irqrestore(&bcm->irq_lock, flags); - bcm43xx_synchronize_irq(bcm); - } else { - /* Periodic work should take short time, so we want low - * locking overhead. - */ - mutex_lock(&bcm->mutex); - spin_lock_irqsave(&bcm->irq_lock, flags); - } + /* Periodic work may take a long time, so we want it to + * be preemtible. In any case, we need to disable transmits. + */ + mutex_lock(&bcm->mutex); + netif_tx_disable(bcm->net_dev); + spin_lock_irqsave(&bcm->irq_lock, flags); + bcm43xx_mac_suspend(bcm); + if (bcm43xx_using_pio(bcm)) + bcm43xx_pio_freeze_txqueues(bcm); + savedirqs = bcm43xx_interrupt_disable(bcm, BCM43xx_IRQ_ALL); + spin_unlock_irqrestore(&bcm->irq_lock, flags); + bcm43xx_synchronize_irq(bcm); do_periodic_work(bcm); - - if (badness > BADNESS_LIMIT) { - spin_lock_irqsave(&bcm->irq_lock, flags); - tasklet_enable(&bcm->isr_tasklet); - bcm43xx_interrupt_enable(bcm, savedirqs); - if (bcm43xx_using_pio(bcm)) - bcm43xx_pio_thaw_txqueues(bcm); - bcm43xx_mac_enable(bcm); - netif_wake_queue(bcm->net_dev); - } + spin_lock_irqsave(&bcm->irq_lock, flags); + tasklet_enable(&bcm->isr_tasklet); + bcm43xx_interrupt_enable(bcm, savedirqs); + if (bcm43xx_using_pio(bcm)) + bcm43xx_pio_thaw_txqueues(bcm); + bcm43xx_mac_enable(bcm); + netif_wake_queue(bcm->net_dev); mmiowb(); spin_unlock_irqrestore(&bcm->irq_lock, flags); mutex_unlock(&bcm->mutex);