From: hpa@zytor.com (H. Peter Anvin) Date: Wed, 13 Dec 2006 22:01:42 +0000 Subject: [lm-sensors] [RFC] new MSR r/w functions per CPU Message-Id: <45807846.3010705@zytor.com> List-Id: References: <45807469.6040609@assembler.cz> In-Reply-To: <45807469.6040609@assembler.cz> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Rudolf Marek Cc: norsk5@xmission.com, lkml , LM Sensors , bluesmoke-devel@lists.sourceforge.net Rudolf Marek wrote: > Hello all, > > For my new coretemp driver[1], I need to execute the rdmsr on particular > processor. There is no such "global" function for that in the kernel so > far. > > The per CPU msr_read and msr_write are used in following drivers: > > msr.c (it is static there now) > k8-edac.c (duplicated right now -> driver in -mm) > coretemp.c (my new Core temperature sensor -> driver [1]) > > Question is how make an access to that functions. Enclosed patch does > simple EXPORT_SYMBOL_GPL for them, but then both drivers (k8-edac.c and > coretemp.c) would depend on the MSR driver. The ultimate solution would > be to move this type > of function to separate module, but perhaps this is just bit overkill? > > Any ideas what would be the best solution? > For now I think you could just export these and allow the dependency. I've been meaning to rewrite the MSR and CPUID drivers to use a common core, which would also allow invoking nnostandard CPUID and msrs which need the entire register file to be set; that should probably be included in that. In fact, I've made that change something like four times (it seems to be an airplane project that I never get around to submitting), so I should actually get it finished and sent in. -hpa