From: Andy Furniss Date: Wed, 17 Jan 2007 21:18:26 +0000 Subject: Re: [LARTC] egress bandwidth not limited / limited Message-Id: <45AE92A2.90400@andyfurniss.entadsl.com> List-Id: References: <45AC22ED.4060107@skula.com> In-Reply-To: <45AC22ED.4060107@skula.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lartc@vger.kernel.org Roman Skula wrote: > Andy Furniss napisa=B3(a): >=20 >>Roman Skula wrote: >> >>>05:04.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5714 >>>Gigabit Ethernet (rev a3) >> >>You may need to turn off segmentation offload with ethtool -k >=20 > A huge, wet kiss for you, this turned my sky blue again. :) Lol - I forgot to mention: be carefull about using htb default, your=20 arp/other link layer end up there. If you don't specify a default htb=20 will let them through unshaped, you can make a filter to catch the=20 unclassified IP traffic and send it to the class you want. Andy. _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc