From: Andy Furniss Date: Thu, 29 Mar 2007 02:33:11 +0000 Subject: Re: [LARTC] RE: IFB setup was no subject Message-Id: <460B2567.3060407@andyfurniss.entadsl.com> List-Id: References: <460A9EBB.5090905@andyfurniss.entadsl.com> In-Reply-To: <460A9EBB.5090905@andyfurniss.entadsl.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Leigh Sharpe wrote: > Seems that the example I gave actually works, but not the way I'm using it. > I am bridging VLAN tagged packets, Try protocol 8021q or whatever its number is - if there are other protocol filters you will need a different prio or you will get an error. but for some reason they are not being subjected to the rate limit. If I pass normal, untagged packets through this setup, it behaves as expected. However, once I put tagged packets through the bridge, it fails to shape traffic. > I don't want to have to use VLAN sub-interfaces, because the VLAN code strips the 802.1q tag from packets before they can be examined, which causes me problems in other areas. Are these wireless customers? I've never shaped wireless - do you get alot of extra loss from link layer, what's the bandwidth, single duplex or is it round robin type? I wonder if htb tweaked/untweaked/hfsc/policers could be better than cbq - you may be able to get things better for link latyer, tcpdumps will show you how bursty things are for users. Andy. _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc