From: Andy Furniss Date: Fri, 30 Mar 2007 00:15:30 +0000 Subject: Re: [LARTC] Problem attaching htb class to a htb qdisc Message-Id: <460C56A2.6020500@andyfurniss.entadsl.com> List-Id: References: <1173948436.5168.3.camel@localhost> In-Reply-To: <1173948436.5168.3.camel@localhost> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Ruben Porras wrote: > I'm trying to build a QoS system that would divide the outgoing traffic > into four categories, each one also subdivided into two more categories. > For that I chose a htb root qdisc subdivided into four classes, each of > these classes contains also a htb qdisc. Until these point everything > goes well, but when I try to attach a new class to the leaf htb qdisc a > problem with the sintaxis arises. Code follows: > > > tc qdisc add dev $DEV root handle 1: htb default 30 Remember if $DEV is eth arp will go here. > > tc class add dev $DEV parent 1: classid 1:1 htb rate > ${UPLINK}kbit > > tc class add dev $DEV parent 1:1 classid 1:10 htb rate > ${UPLINK}kbit > tc class add dev $DEV parent 1:1 classid 1:20 htb rate > ${UPLINK}kbit > tc class add dev $DEV parent 1:1 classid 1:30 htb rate > ${UPLINK}kbit > tc class add dev $DEV parent 1:1 classid 1:40 htb rate > ${UPLINK}kbit If you want UPLNK to be the max then children need UPLINK/4 - the parent will not cap it. Use ceil UPLINK aswell if you want each to be able to reach max when other classes are empty. > > tc qdisc add dev $DEV parent 1:10 handle 10: htb default 12 This is strange, not sure if it's what you want - you don't need another htb here, though it is possible it's not normal. If you just want a child under 1:10 then do as you do below with parent 1:10, but remember parents don't cap rate of children. > tc class add dev $DEV parent 10: classid 1:11 htb rate > ${UPLINK}kbit > prio 1 If you really want htb under htb then classid 10:11 may work. Andy. > > RTNETLINK answers: Invalid argument > > tc class add dev $DEV parent 10: classid 1:12 htb rate > ${UPLINK}kbit > prio 2 > > RTNETLINK answers: Invalid argument > > tc qdisc add dev $DEV parent 1:11 handle 11: sfq perturb 10 > tc qdisc add dev $DEV parent 1:12 handle 12: sfq perturb 10 > > ... > > If I attach the classes to 1: instead of 10: everything goes well, but I > do not understand why I can't attach a class to 10: > > Any help would be appreciated. > > _______________________________________________ > LARTC mailing list > LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc > _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc