From: Andy Furniss Date: Tue, 03 Apr 2007 19:44:37 +0000 Subject: Re: [LARTC] Help needed with HTB Message-Id: <4612AEA5.2090701@andyfurniss.entadsl.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Edgar Merino wrote: > Hello, a few days ago I sent an email asking for help with my tc htb > rules I've got (a script), but I'm not sure if that email got to you... > anyway, I'm sending it again along with my htb script and I'll tell you > the problem once again: > > I have a computer with ip 192.168.0.100 which is acting as a p2p server, > so I want to shape traffic coming out from that ip, I have a linux box > acting as a router with two NICs, server ip is 192.168.0.1. So I hope > you can take a look at it and tell me why is it that everytime I have > mldonkey or any other p2p software running on that computer I experience > a lot of latency in my whole network with http traffic, maybe someone > can help me out specify the burst and cburst parameters... and maybe > even the quantum parameter, and some little explanation on it since I > haven't been able to understand what the benefits of this parameters are. The rates on htb child classes should not add up to any more that about 80% of the link speed. The parent rate and ceils should be equal to about 80% of link speed. I guess you already know for tc bps = bytes/sec. Read some of my recent posts about htb default on eth. Check with iptables -L -v -n that the rules are matching as you expect - without testing I can't recall if the output one will see addresses. Andy. _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc