From: Andy Furniss Date: Sat, 12 May 2007 00:41:55 +0000 Subject: Re: [LARTC] HTB and bursts Message-Id: <46450D53.5080702@andyfurniss.entadsl.com> List-Id: References: <20070511190348.41B6D450A@outpost.ds9a.nl> In-Reply-To: <20070511190348.41B6D450A@outpost.ds9a.nl> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Pablo Fernandes Yahoo wrote: > I would like to have the customer using 150kbit stable in a download. But at > the begining of the conection, i would like to have a 200kbit burst. Depends what you mean - burst is an amount of data not a bitrate. If you want them (using your setup) to have 25k of data unlimited rate then burst 25k cburst 25k should do it. I think that if your class has a different ceil to rate then giving a burst but not cburst will give them burst bytes capped at ceil rate. I haven't tested the exact behavior or read all recent posts yet. Andy. _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc