From: Andy Furniss Date: Wed, 30 May 2007 20:48:06 +0000 Subject: Re: [LARTC] rate limiting netmask w/ dd-wrt Message-Id: <465DE306.2040000@andyfurniss.entadsl.com> List-Id: References: <81ad6ba10705261606n339e4644id7686881c95dcf6d@mail.gmail.com> In-Reply-To: <81ad6ba10705261606n339e4644id7686881c95dcf6d@mail.gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Ryan O'Toole wrote: > I'm trying to setup a DD-WRT router (www.dd-wrt.com; embedded micro-device > linux for the uninitiated) to rate limit all the traffic it receives from > its wi-fi interface. Qdiscs work on traffic leaving the interfaces. If you want to limit incoming traffic have a look at the policer example in LARTC, there are other ways using ifb/imq, but I don't know if dd-wrt will have those. Wireless is a special case - half duplex, so it's going to be even harder to do. Andy. _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc