From: Andy Furniss Date: Tue, 19 Jun 2007 22:03:59 +0000 Subject: Re: [LARTC] Re: PQ questions Message-Id: <467852CF.6060007@andyfurniss.entadsl.com> List-Id: References: <1181853828.10947.15.camel@benve-laptop> In-Reply-To: <1181853828.10947.15.camel@benve-laptop> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Salim S I wrote: > I tested on wireless link. It could give a maximum of 45Mbps. And I sent > 30Mbps of both low prio and high prio traffic. Total of 60Mbps. > My test was done with UDP, using tcpdump. When I increased the bandwidth > to 40Mbps each, the high priority class got lesser bandwidth. Maybe wireless is a special case here - was the driver/device actually on the prio box? (maybe the > effect of the known issue that large amount of low prio traffic can > starve high prio traffic) On eth using tcp I can get prio to behave quite well. You need to remember to filter arp to a high (best empty) class - it goes to x:2 by default, which made for a bit of wierdness when I tried last. If you use tcp on my 100meg eth there is still a 300pkt buffer to fill before prio gets backlogged, so window scaling needs to be on and both ends need decent size buffers/scale amounts. Maybe UDP would be different I'll have to try sometime. Andy. _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc