From: Andy Furniss Date: Tue, 19 Jun 2007 22:17:16 +0000 Subject: Re: [LARTC] Re: PQ questions Message-Id: <467855EC.30209@andyfurniss.entadsl.com> List-Id: References: <1181853828.10947.15.camel@benve-laptop> In-Reply-To: <1181853828.10947.15.camel@benve-laptop> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Tim Enos wrote: > Cool, > > Thanks Christian! I'm wishing that all of those same params showed up in the > output without having to run anything. No problem. Should it matter that I'm > using an emulated interface? Quite possibly - using prio on real devices still can appear not to work until you have filled up any buffer the driver uses. On my 100meg eth it would take 5/6 unscaled tcp connections to fill enough for prio to do anything. You can use prio as a child of hfsc/htb so that they set the rate. It may be nicer to use htb's own prio though, if you need a slow rate and care about latency. Andy. _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc