From: Andy Furniss Date: Tue, 17 Jul 2007 01:24:39 +0000 Subject: Re: [LARTC] voip quality/bandwidth/latency techniques Message-Id: <469C1A57.1050405@andyfurniss.entadsl.com> List-Id: References: <46968632.30801@czexan.net> In-Reply-To: <46968632.30801@czexan.net> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org dale wrote: > I have voip quality issues I would like to minimize. I have a ~= > 3M/384k (Comcast) cable modem and a CentOS based Linux router (SME 7, > 2.6.9 kernel) with 5 NAT'd devices (3 PCs "DHCP", 2 Vonage adapters > "static 10.10.2.10-11"). The quality problems are audio cutting out and > popping. I tried the following (see below) based on a Cookbook example, > but I still have audio popping. I have noticed popping corresponding > with web browsing, etc. Maybe you need to consider shaping/policing ingress traffic aswell. Any suggestions that may improve voip quality? > Also, are there any network metric capture/graphing tools that are > helpful to analyze these type of issues. I'm thinking of a graph that > shows various network metrics. I could watch the graph while using the > phone and correlate graph spikes with audio pops. Thanks in advance for > your help. I don't use any graphing tools, but I would mark icmp as 1 aswell and have ping running while testing. > > Dale > > > > tc qdisc del root dev eth1 > tc qdisc add dev eth1 root handle 1: htb default 12 Since you mark all unmarked ip as 3 you don't need default 12 - it will send arp to the worst class. > tc class add dev eth1 parent 1: classid 1:1 htb rate 300kbit ceil 300kbit > tc class add dev eth1 parent 1:1 classid 1:10 htb rate 200kbit ceil > 300kbit prio 0 > tc class add dev eth1 parent 1:1 classid 1:11 htb rate 50kbit ceil > 300kbit prio 1 > tc class add dev eth1 parent 1:1 classid 1:12 htb rate 30kbit ceil > 300kbit prio 2 > tc filter add dev eth1 parent 1:0 protocol ip prio 1 handle 1 fw classid > 1:10 > tc filter add dev eth1 parent 1:0 protocol ip prio 2 handle 2 fw classid > 1:11 unused? > tc filter add dev eth1 parent 1:0 protocol ip prio 3 handle 3 fw classid > 1:12 > iptables -t mangle -A PREROUTING --src 10.10.2.10 -j MARK --set-mark 0x1 > iptables -t mangle -A PREROUTING --src 10.10.2.10 -j RETURN > iptables -t mangle -A PREROUTING --src 10.10.2.11 -j MARK --set-mark 0x1 > iptables -t mangle -A PREROUTING --src 10.10.2.11 -j RETURN > iptables -t mangle -A PREROUTING -j MARK --set-mark 0x3 Andy. _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc