From: Stefan Richter Subject: Re: Some quick scsi documentation questions: Date: Sat, 04 Aug 2007 02:35:46 +0200 Message-ID: <46B3C9E2.7090906@s5r6.in-berlin.de> References: <200707252328.28981.rob@landley.net> <200708022055.45523.rob@landley.net> <46B306CD.3030002@s5r6.in-berlin.de> <200708031611.26768.rob@landley.net> <46B3C36F.8060405@s5r6.in-berlin.de> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Return-path: Received: from einhorn.in-berlin.de ([192.109.42.8]:52875 "EHLO einhorn.in-berlin.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755910AbXHDAgJ (ORCPT ); Fri, 3 Aug 2007 20:36:09 -0400 In-Reply-To: <46B3C36F.8060405@s5r6.in-berlin.de> Sender: linux-scsi-owner@vger.kernel.org List-Id: linux-scsi@vger.kernel.org To: Rob Landley Cc: dougg@torque.net, James Bottomley , linux-scsi@vger.kernel.org > Did people point you already to http://www.t10.org/scsi-3.htm? ... > Also have a look at the SAM-4 spec, figure 2. PS: See also SAM-4 annex A tables A.2 and A.3: The concatenation of target port identifier and logical unit identifier is one important way to uniquely and persistently identify SCSI devices. Linux' SCSI transport layer implementations currently have no common way to expose these identifiers to userspace though; the parts that make up these identifiers are located in diverse sysfs attributes. -- Stefan Richter -=====-=-=== =--- --=-- http://arcgraph.de/sr/