From: Stefan Richter Date: Sun, 12 Aug 2007 10:43:53 +0000 Subject: Re: [lm-sensors] 2.6.23-rc1 regression: hwmon/w83627ehf: wrong fan Message-Id: <46BEE469.8080403@s5r6.in-berlin.de> List-Id: References: <46B5B290.4040907@s5r6.in-berlin.de> <20070805162141.GI6221@jupiter.solarsys.private> <46B6053E.2050708@s5r6.in-berlin.de> <20070810230831.59cbc50f@hyperion.delvare> <46BCE6D0.7060300@s5r6.in-berlin.de> <20070811135705.0d0688d7@hyperion.delvare> <46BDD8B3.8070708@s5r6.in-berlin.de> <20070812111713.1afb24c6@hyperion.delvare> <46BEE247.4040904@s5r6.in-berlin.de> In-Reply-To: <46BEE247.4040904@s5r6.in-berlin.de> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Jean Delvare Cc: "Mark M. Hoffman" , lm-sensors@lm-sensors.org, linux-kernel@vger.kernel.org I wrote: > Jean Delvare wrote: >> One remaining mystery is why you did not observe the problem with the >> older kernel. Maybe the ACPI thermal driver was not loaded (or not >> working) back then? > > I found two differences: Gentoo's udev init script autoloads thermal on > boot under 2.6.23-rc2 but it doesn't under 2.6.22(-rc5), for a reason > unknown to me. If I manually load thermal under 2.6.22(-rc5), [...] The reason are obviously some post 2.6.22/ pre 2.6.23-rc1 commits which add module aliases to ACPI drivers. -- Stefan Richter -===-=-== =--- -=-- http://arcgraph.de/sr/ _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors