From: Andy Furniss Date: Mon, 27 Aug 2007 20:55:51 +0000 Subject: Re: [LARTC] Traffic shaping PPPoe encapsulated packet Message-Id: <46D33A57.4030805@andyfurniss.entadsl.com> List-Id: References: <46D1ABFA.1060901@wlink.com.np> In-Reply-To: <46D1ABFA.1060901@wlink.com.np> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Samit wrote: > Hi, > > I want a way to traffic shape pppoe encapsulated pkts based on its > src/dst Ip address. Is there any way I can mark pppoe encapsulated pkts? I don't know what you can do with iptables now it's X tables. If you have the ppp interface on the shaping/netfilter box then you will see ip from/to it anyway. If the pppoe is just passing through then you should be able to make a u32 filter to match parts of the packet. Use tcpdump -e to see the ethertype protocol number for pppoe data frames and make a filter to match that number, then I guess the IP part will be at an offset of 8 more than the normal offsets. You will need to use u32 to match the src/dst addresses in hex. I have never done it, but it should be possible. tc filter add dev $DEV protocol $PPPOE prio 1 u32 match u32 0xc0a80001 0xffffffff at 20 flowid .... should match src 192.168.0.1 use "at 24" for dst. Andy _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc