From: Jim Barber Date: Sat, 06 Oct 2007 23:42:20 +0000 Subject: Re: [LARTC] ipp2p segmentation fault Message-Id: <47081D5C.3090000@ddihealth.com> List-Id: References: <470722AD.2080303@ddihealth.com> In-Reply-To: <470722AD.2080303@ddihealth.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hi Aleksanser. When running the patch-o-matic part to apply the ipp2p patches it patches both the kernel and the iptables sources. So the iptables that I have compiled and installed under the /usr/local/ tree already does have the ipp2p module. Why am I using using patch-o-matic-ng? Mainly because I am familiar with it. If you refer to the ipp2p FAQ at http://www.ipp2p.org/faq_en.html under the question "How can I obtain IPP2P?", part of the answer is as follows: "Another way to install IPP2P is through Patch-O-Matic-ng from http://www.netfilter.org wich adds patches and updates to your kernel and iptables sources. You'll need to recompile both afterwards." So that is the approach I took. The patch-o-matic-ng script downloads the ipp2p patches, they aren't distributed with it. So it'll get the latest at the time, which on Sep 26th was 0.8.1_rc1, if I had waited a day or two 0.8.2 would have been out. I'll try again using the newer version. Thanks. ---------- Jim Barber DDI Health Aleksander Kamenik wrote: > Hi, > > IIRC you had to compile the module for the kernel and iptables, you're missing the latter. > > Why are you using patch-o-matic if you only need ipp2p? What version of ipp2p is in pom? > > Try downloading this one (latest): > http://ipp2p.org/downloads/ipp2p-0.8.2.tar.gz > > And follow these instructions: http://ipp2p.org/docu_en.html#install > > Regards, > _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc