Return-Path: Received: from hawk.dcu.ie (mail.dcu.ie [136.206.1.5]) by ozlabs.org (Postfix) with ESMTP id 7E29CDDE9D for ; Sat, 23 Feb 2008 04:43:54 +1100 (EST) Date: Fri, 22 Feb 2008 17:23:21 +0000 Message-ID: <4726E9350007F0D6@hawk.dcu.ie> In-Reply-To: From: "Alan Casey" Subject: Re: Xilinx PowerPC To: "Grant Likely" MIME-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-15" Cc: linuxppc-embedded Reply-To: alan.casey5@mail.dcu.ie List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , >-- Original Message -- >Date: Thu, 21 Feb 2008 12:02:21 -0700 >From: "Grant Likely" >To: "Stephen Neuendorffer" >Subject: Re: Xilinx PowerPC >Cc: linuxppc-embedded > > >On Thu, Feb 21, 2008 at 10:50 AM, Stephen Neuendorffer > wrote: >> > Step 2). >> > the code in arch/powerpc/???? is the devicetree equval= ent >> to >> > arch/ppc/platforms/4xx/xilinx_ml410.c >> http://git.xilinx.com/linux-2.6-xlnx.git contains a preliminary stab at >> the bootcode for Virtex. I've been using this for a while with >> ARCH=3Dpowerpc. There isn't really much need for board specific plat= form >> code: This should (I think) be handled by the device tree. All of th= is >> is still pretty preliminary at the moment however. The big problem w= ith >> the boot code in the Xilinx tree is that you need to be able to alloc= ate >> memory in order to parse the device tree in order to figure out how m= uch >> memory you have. I just haven't rewritten the code to use libfdt, wh= ich >> can query the device tree without memory allocation yet. Grant has a= >> slightly different scheme in his tree, but it works as well. General= ly >> I've been more focused on avoiding u-boot, whereas Grant has been usi= ng >> u-boot exclusively, I think. > >Actually, I'm not using u-boot at all. I've reworked the 'raw' image >target to use libfdt and properly initialize the cache and stuff. >I'll be merging it in the .26 merge window. > Hi, Just wondering - is it possible to use U-Boot on the Xilinx XUPV2PRO board or any similar tools (such as libfdt?) to copy a Linux kernel and= ramdisk filesystem from a SystemACE card to memory, uncompress them and= boot the Linux kernel etc?? If so is there any notes/docs about how to do this or similar online anywhere? Any info. appreciated, Regards&Thanks, Alan.