From: Bernard Pidoux Subject: Re: dmascc ? Date: Thu, 15 Nov 2007 14:01:28 +0100 Message-ID: <473C4328.9020709@ccr.jussieu.fr> References: <47380198.7020906@ve7hex.ampr.org> <20071115000703.GA30665@linux-mips.org> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20071115000703.GA30665@linux-mips.org> Sender: linux-hams-owner@vger.kernel.org List-Id: Content-Type: text/plain; charset="us-ascii"; format="flowed" To: Ralf Baechle DL5RB Cc: Niall Parker , linux-hams Hi, Is an SMP kernel mandatory for running a multithreaded P4 CPU or would'not a single CPU kernel make it (with a 50% performance reduction) ? 73 de bernard, f6bvp Ralf Baechle DL5RB wrote: > On Sun, Nov 11, 2007 at 11:32:40PM -0800, Niall Parker wrote: > >> It's been a while since I've tried a new kernel with my PI2 cards and >> just discovered that while the source is still included in >> drivers/net/hamradio/dmascc.c , it isn't possible to select via make >> menuconfig even when CONFIG_EXPERIMENTAL is set. >> >> I hunted through the linux-hams archives and it looks like the code is >> still being updated, is there some other reason why dmascc is no longer >> a config option ? > > You can only configure the driver when building a uniprocessor kernel for > an ISA system and AX25 must also be enabled. Even an oldfashioned > hyperthreaded P4 needs an SMP kernel these days so this driver is hardly > being offered anymore and I guess that's the problem you're having. > > Ralf > > 73 de DL5RB op Ralf > > -- > Loc. JN47BS / CQ 14 / ITU 28 / DOK A21 > Packet: DL5RB@DB0FHN.#BAY.DEU.EU > - > To unsubscribe from this list: send the line "unsubscribe linux-hams" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > >