From: Michael Reinelt Subject: Core2Duo locked at 800MHz Date: Mon, 26 Nov 2007 06:49:06 +0000 Message-ID: <474A6C62.3070103@reinelt.co.at> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: cpufreq-bounces@lists.linux.org.uk Errors-To: cpufreq-bounces+glkc-cpufreq=m.gmane.org+glkc-cpufreq=m.gmane.org@lists.linux.org.uk To: cpufreq@lists.linux.org.uk Hi there, I got a strange problem here... I have a Fujitsu Lifebook E8410 with a 2.4GHz Core2Duo CPU. When I load and run various cpufreu utilities, after some time the CPU gets locked at 800MHz (the lowest possible frequency) I tried to debug a bit, but I'm unable to interpret things, so I'm asking for some advice. What I found out is that the problem seems to be related to ACPI or the acpi-cpufreq module. When I boot the notebook into single-user mode (using vanilla 2.6.23 or 2.6.24-rc3), with no modules loaded, the cpu runs at 2.4GHz. As soon as I laod the acpi-cpufreq module, the upper limit falls in some steps (2 GHz, 1200MHz) to 800 MHz. Note that there is neither acpid nor any powersave daemon running! I tried to play with cpufreq.debug, but I don't know what all the messages are about :-( I already installed the latest BIOS 1.08 from Fujitsu, but nothing changes. At the moment my workaround is *not* to load acpi-cpufreq, so the CPU stays at 2.4GHz all the time, but I really want to use powersaving with the machine.... I'm willing to provide all necessary infos If you tell me what to to. Thanks in advance, Michael -- Michael Reinelt http://home.pages.at/reinelt GPG-Key 0xDF13BA50 ICQ #288386781