From: Jean-Louis Dupond Subject: Re: ATA bus error with external hd on esata Date: Mon, 17 Dec 2007 18:26:41 +0100 Message-ID: <4766B151.6080406@dupondje.be> References: <47642D9A.4080600@softmonsters.com> <476434C7.6040307@softmonsters.com> <20071217025321.2f7507db.akpm@linux-foundation.org> <87f94c370712170909y691dc2e3rf7f23c64eff8da22@mail.gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: In-Reply-To: <87f94c370712170909y691dc2e3rf7f23c64eff8da22@mail.gmail.com> Sender: linux-kernel-owner@vger.kernel.org To: Greg Freemyer Cc: Andrew Morton , Zsolt Barat , lkml , linux-ide@vger.kernel.org List-Id: linux-ide@vger.kernel.org Greg Freemyer schreef: > On Dec 17, 2007 5:53 AM, Andrew Morton wr= ote: > =20 >> On Sat, 15 Dec 2007 21:10:47 +0100 Zsolt Barat wrote: >> >> =20 >>> Zsolt Barat schrieb: >>> =20 >>>> hi list, >>>> =20 >> Let's cc the IDE development list. >> >> =20 >>>> i just bought a "MyBook" called external HD with a fixed enclosure= , from >>>> WD. Connected to the SATA port i constantly get "ATA bus error" me= ssages >>>> in the kernel log. Is this a known issue? >>>> >>>> =20 > > As an FYI: I've had a lot of problems with the big prepackaged drives > in the last 6 months even from Windows, so I would not be too quick t= o > blame Linux. > > ie. > I bought several 500GB / 1000GB Buffalo Drives last month with plans > to use them from Windows via USB. > > I attempted to do a lot of heavy file copying to/from them. I was > getting a bunch of "Delayed Write Failures", > > I finally gave up. > > The 500GB drives had a single hard drive internally, so I opened the > case, removed the drive and connected them via standalone external > carriers I had around. In that mode the drives worked fine (from > Windows). I've used both standalone eSata external carriers and > standalone USB external carriers with these same physical drives with > no issues. > > My conclusion is that the electronics in the prepackaged external > units is just not up to the job if your doing heavy i/o. > > Greg > =20 Could u check the temps of the disk ? I had that error in windows also=20 with to hot disks ! If temp is >50=B0C I would start to worry :) -- To unsubscribe from this list: send the line "unsubscribe linux-kernel"= in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/