From: Ben Hewson Date: Thu, 30 Apr 2015 13:57:58 +0100 Subject: [U-Boot] loading environment from SATA Message-ID: <47683292.Z98BvacQce@fnr-ben-pc> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de booting from SATA works very well on my iMX6 based board, however if I do #define CONFIG_ENV_IS_IN_FAT #if defined(CONFIG_ENV_IS_IN_FAT) #define CONFIG_FAT_WRITE #define FAT_ENV_INTERFACE "sata" #define FAT_ENV_DEVICE_AND_PART "0:1" #define FAT_ENV_FILE "u-boot.env" #endif nothing is loaded as the SATA has not been initialised. Looking at board_r.c I can see lots of inits, for mmc, nand and other stuff, but not sata. Following the format I have added a function #ifdef CONFIG_CMD_SATA static int initr_sata(void) { puts("SATA: "); sata_initialize(); return 0; } #endif and inside init_fnc_t init_sequence_r[] = { after #ifdef CONFIG_GENERIC_MMC initr_mmc, #endif I have added #ifdef CONFIG_CMD_SATA initr_sata, #endif So this compiled and booted and to my surprise worked. Is this the best way to achieve this. I can see potential problems if sata_inialize() depends on other sub-systems being initialized first. I am perhaps lucky that it works for me. regards Ben