From: michael Date: Tue, 12 Feb 2008 23:22:37 +0100 Subject: [U-Boot-Users] sam9263ek not booting uboot dataflash In-Reply-To: <3972542e0802121403y5dcca65cq23ba2329b6fdab36@mail.gmail.com> References: <3972542e0802121021x7e80e62aqa90b319f200aa896@mail.gmail.com> <47B1F70E.205@gandalf.sssup.it> <3972542e0802121157u12dba885jf86f9a5c9b9776cf@mail.gmail.com> <47B1FB27.2050202@gandalf.sssup.it> <3972542e0802121211q5b62affftbfaa7e19f79a9ba5@mail.gmail.com> <47B200CF.9090009@gandalf.sssup.it> <3972542e0802121314l47e7e9fqeb8c48b07d73d33a@mail.gmail.com> <47B20E5D.7010008@gandalf.sssup.it> <3972542e0802121332q450bb001i8dd9479d3b24e64e@mail.gmail.com> <47B21152.2010503@gandalf.sssup.it> <3972542e0802121403y5dcca65cq23ba2329b6fdab36@mail.gmail.com> Message-ID: <47B21C2D.2040500@gandalf.sssup.it> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de E Robertson wrote: > On 2/12/08, michael wrote: > >> Hi, >> >>> That's exactly what I have but I always get this after about 24% : >>> >>> ************************* >>> SEND-class command failed. >>> Packets sent: 69 >>> Retransmissions: 11 >>> Timeouts: 12 >>> Damaged packets: 0 >>> Fatal Kermit Protocol Error: Too many retries >>> >>> HINTS... If the preceding error message does not explain the failure: >>> . Try changing the remote Kermit's FLOW-CONTROL setting. >>> . Try it again with SET STREAMING OFF. >>> . Try it again with SET PARITY SPACE. >>> . As a last resort, give a ROBUST command and try again. >>> Also: >>> . Be sure the source file has read permission. >>> . Be sure the target directory has write permission. >>> (Use SET HINTS OFF to suppress hints.) >>> ************************* >>> ~ >>> >>> >>> >> The system is up? Do you have the u-boot console again? Do you choose >> a good memory address for starting download? >> > > That was the problem. I choose a new address and it downloaded ok. > However, it seems that my initial conclusion was correct in that it's > the u-boot build. It hangs when I ran the new image. The old "working > image" at least ran. It looks like I need to do some work on the boot > process in uboot. > > Thanks much for your help. > > Can you send me your diff?