From: michael Date: Mon, 25 Feb 2008 18:06:12 +0100 Subject: [U-Boot-Users] Problem with PXA PCMCIA & (IDE) CF In-Reply-To: <20080225170113.GD23465@enneenne.com> References: <20080225170113.GD23465@enneenne.com> Message-ID: <47C2F584.6060509@gandalf.sssup.it> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi, Rodolfo Giometti wrote: > ide_outb (dev= 2, port= 0x1f3, val= 0x00) : @ 0x200001f3 > ide_outb (dev= 2, port= 0x1f4, val= 0x00) : @ 0x200001f4 > ide_outb (dev= 2, port= 0x1f5, val= 0x00) : @ 0x200001f5 > ide_outb (dev= 2, port= 0x1f6, val= 0xe0) : @ 0x200001f6 > ide_outb (dev= 2, port= 0x1f7, val= 0x20) : @ 0x200001f7 > ide_inb (dev= 2, port= 0x1f7) : @ 0x200001f7 -> 0xd1 > ide_inb (dev= 2, port= 0x1f7) : @ 0x200001f7 -> 0x51 > Error (no IRQ) dev 2 blk 0: status 0x51 > > So, the CF is recognized but when the system tries to read first > sectors something goes wrong! > > Any suggestions? > > Rodolfo > > This happen in the true ide mode when the timings are wrong so maybe you have the same problem in pcmcia mode. Michael