From: Stefan Richter Subject: Re: Recommendation for activating a deferred module init in the kernel Date: Wed, 18 Jun 2008 02:10:42 +0200 Message-ID: <48585282.4020508@s5r6.in-berlin.de> References: <48580116.9070504@am.sony.com> <20080617190750.GA31224@logfs.org> <485815F6.20507@am.sony.com> <485816B3.3080800@am.sony.com> <20080617202318.GC31224@logfs.org> <20080617163516.2be96400@vader.jdub.homelinux.org> <48583F3B.1090705@s5r6.in-berlin.de> <20080618000306.GA25466@linuxtv.org> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20080618000306.GA25466@linuxtv.org> Sender: linux-embedded-owner@vger.kernel.org List-ID: Content-Type: text/plain; charset="us-ascii"; format="flowed" To: Johannes Stezenbach Cc: Tim Bird , Josh Boyer , =?ISO-8859-1?Q?J=F6rn_Engel?= , linux-embedded , linux kernel Johannes Stezenbach wrote: > I think the USB bus enumeration can take significant time: > recognize a device is connected, turn on bus power, try > to read descriptors (bus powered devices might be slow to > respond after power up). And this will happen even with > drivers_autoprobe == 0, right? Probably... I don't know which particular steps happen in the USB core before upper layer drivers are bound. Not binding the [eou]hci-hcd PCI driver would certainly be more effective. -- Stefan Richter -=====-==--- -==- =--=- http://arcgraph.de/sr/