From: Matthew Ranostay Subject: [PATCH] hda: slave_dig_outs code block in wrong location Date: Thu, 25 Sep 2008 09:17:11 -0400 Message-ID: <48DB8F57.3050001@embeddedalley.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from easi.embeddedalley.com (easi.embeddedalley.com [71.6.201.124]) by alsa0.perex.cz (Postfix) with SMTP id 8408B245C8 for ; Thu, 25 Sep 2008 15:17:21 +0200 (CEST) List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: alsa-devel@alsa-project.org Cc: Takashi Iwai List-Id: alsa-devel@alsa-project.org Removed invalid references to slave_dig_outs inside the S/PDIF IN capture switch control. Beforehand this was basically a mute switch for the S/PDIF outs as well. Signed-off-by: Matthew Ranostay --- diff --git a/pci/hda/hda_codec.c b/pci/hda/hda_codec.c index c742e10..cb9aae5 100644 --- a/pci/hda/hda_codec.c +++ b/pci/hda/hda_codec.c @@ -1652,15 +1652,9 @@ static int snd_hda_spdif_in_switch_put(struct snd_kcontrol *kcontrol, mutex_lock(&codec->spdif_mutex); change = codec->spdif_in_enable != val; if (change) { - hda_nid_t *d; codec->spdif_in_enable = val; snd_hda_codec_write_cache(codec, nid, 0, AC_VERB_SET_DIGI_CONVERT_1, val); - - if (codec->slave_dig_outs) - for (d = codec->slave_dig_outs; *d; d++) - snd_hda_codec_write_cache(codec, *d, 0, - AC_VERB_SET_DIGI_CONVERT_1, val); } mutex_unlock(&codec->spdif_mutex); return change;