From: "Christopher S. Aker" Subject: Re: 2.6.27 - SMP enabled, but only 1 CPU Date: Tue, 04 Nov 2008 15:13:52 -0500 Message-ID: <4910AD00.7040605@theshore.net> References: <48F3BC99.5040409@theshore.net> <490F5F50.7020704@theshore.net> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <490F5F50.7020704@theshore.net> List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , Sender: xen-devel-bounces@lists.xensource.com Errors-To: xen-devel-bounces@lists.xensource.com To: xen devel Cc: Jeremy Fitzhardinge List-Id: xen-devel@lists.xenproject.org Christopher S. Aker wrote: > Christopher S. Aker wrote: >> I just compiled 2.6.27 (pae) using my .config from 2.6.26. It boots >> fine, but only one CPU shows up, despite "vcpus = 4" and all of the >> SMP goodness enabled. This happens on both Xen 3.2.x and 3.3.x (64 >> bit hypervisor). >> >> beefcake:2.6.27-linode14# grep SMP .config >> CONFIG_X86_SMP=y >> CONFIG_X86_32_SMP=y >> CONFIG_USE_GENERIC_SMP_HELPERS=y >> CONFIG_SMP=y >> CONFIG_X86_FIND_SMP_CONFIG=y >> # CONFIG_X86_VSMP is not set >> CONFIG_PM_SLEEP_SMP=y >> >> root@ubuntu:~# uname -a >> Linux ubuntu 2.6.27-linode14 #1 SMP Sun Oct 12 20:34:47 EDT 2008 i686 >> GNU/Linux >> root@ubuntu:~# cat /proc/cpuinfo >> processor : 0 >> ... >> (and that's it -- just one CPU) >> >> I must be missing something obvious, so I'd appreciate another set of >> eyes on this. My .config, boot log, and xen.conf are located here: >> >> http://www.theshore.net/~caker/xen/2.6.27-linode14/config.txt >> http://www.theshore.net/~caker/xen/2.6.27-linode14/bootlog.txt >> http://www.theshore.net/~caker/xen/2.6.27-linode14/xen.conf > > Same with 2.6.27.4 and a defconfig + the paravirt stuff enabled. So, > what's the trick for getting SMP working with 2.6.27.* domUs? Has > anyone achieved this? Same thing with x86_64 domUs. I'll try reverting back to the -rcs... -Chris