From: Stefan Bruens Date: Sun, 13 Sep 2015 18:45:22 +0200 Subject: [U-Boot] [PATCH] smsc95xx: Use zero length packets when RX fifo is empty In-Reply-To: References: <14106325-d7b0-4bcf-ada1-3733d65f285f@HUB2.rwth-ad.de> Message-ID: <4914534.xge4aVbp3n@pebbles.site> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Tuesday 08 September 2015 08:56:12 Joe Hershberger wrote: > On Mon, Sep 7, 2015 at 10:12 PM, Stefan Br?ns > > wrote: > > Using NAKs on empty RX fifo for bulk in transfers is the right choice > > for a interrupt driven model, but U-Boot uses polling and expects an > > immediate answer if there is no incoming packet. Using ZLP Bulk In > > Response > > (BIR) mode avoids unexpected timeouts in the host controller driver. > > > > As ZLP mode is reset default, there is no need to set it. > > > > Signed-off-by: Stefan Br?ns > > LGTM. > > Acked-by: Joe Hershberger Anything I need to do to get this patch and the other ones I sent recently included into U-boot? All pending patches were ACKed. Kind regards, Stefan -- Stefan Br?ns / Bergstra?e 21 / 52062 Aachen home: +49 241 53809034 mobile: +49 151 50412019 work: +49 2405 49936-424