Return-path: Received: from dd16712.kasserver.com ([85.13.137.159]) by www.linuxtv.org with esmtp (Exim 4.63) (envelope-from ) id 1Kya2g-0000iv-HL for linux-dvb@linuxtv.org; Fri, 07 Nov 2008 23:43:03 +0100 Received: from [192.168.178.120] (p50812E25.dip0.t-ipconnect.de [80.129.46.37]) by dd16712.kasserver.com (Postfix) with ESMTP id F1219180BC519 for ; Fri, 7 Nov 2008 23:43:04 +0100 (CET) Message-ID: <4914C482.8010306@helmutauer.de> Date: Fri, 07 Nov 2008 23:43:14 +0100 From: Helmut Auer MIME-Version: 1.0 To: linux-dvb@linuxtv.org Subject: [linux-dvb] tbs 8920 / cx24116 not working List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="iso-8859-15" Content-Transfer-Encoding: quoted-printable Sender: linux-dvb-bounces@linuxtv.org Errors-To: linux-dvb-bounces+mchehab=infradead.org@linuxtv.org List-ID: Hello List, I just tried to get my tbs 8920 running with current S2API and VDR and = also with the multiproto drivers and a patch for this card. Both versions are failing, with this error: Nov 7 23:39:26 [kernel] LNB Voltage SEC_VOLTAGE_18 Nov 7 23:39:26 [vdr] [23138] ERROR (dvbdevice.c,282): Die Operation = wird nicht unterst=FCtzt Nov 7 23:39:35 [vdr] [23138] frontend 0 timed out while tuning to = channel 3, tp 112187 Nov 7 23:39:35 [vdr] [23138] ERROR (dvbdevice.c,282): Die Operation = wird nicht unterst=FCtzt Nov 7 23:39:35 [kernel] LNB Voltage SEC_VOLTAGE_18 Nov 7 23:39:44 [vdr] [23138] ERROR (dvbdevice.c,282): Die Operation = wird nicht unterst=FCtzt Nov 7 23:39:44 [kernel] LNB Voltage SEC_VOLTAGE_18 dmesg shows: LNB Voltage SEC_VOLTAGE_off ACPI: PCI interrupt for device 0000:01:09.0 disabled cx88/2: unregistering cx8802 driver, type: dvb access: shared cx88[0]/2: subsystem: 8920:8888, board: TBS 8920 DVB-S/S2 [card=3D71] ACPI: PCI interrupt for device 0000:01:09.2 disabled Linux video capture interface: v2.00 cx88/0: cx2388x v4l2 driver version 0.0.6 loaded ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [LNKC] -> GSI 11 (level, = low) -> IRQ 11 cx88[0]: subsystem: 8920:8888, board: TBS 8920 DVB-S/S2 = [card=3D72,autodetected], frontend(s): 1 cx88[0]: TV tuner type 4, Radio tuner type -1 cx88[0]/0: found at 0000:01:09.0, rev: 5, irq: 11, latency: 165, mmio: = 0xfc000000 cx88[0]/0: registered device video0 [v4l2] cx88[0]/0: registered device vbi0 cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded cx88[0]/2: cx2388x 8802 Driver Manager ACPI: PCI Interrupt 0000:01:09.2[A] -> Link [LNKC] -> GSI 11 (level, = low) -> IRQ 11 cx88[0]/2: found at 0000:01:09.2, rev: 5, irq: 11, latency: 64, mmio: = 0xfd000000 cx8802_probe() allocating 1 frontend(s) cx88/2: cx2388x dvb driver version 0.0.6 loaded cx88/2: registering cx8802 driver, type: dvb access: shared cx88[0]/2: subsystem: 8920:8888, board: TBS 8920 DVB-S/S2 [card=3D72] cx88[0]/2: cx2388x based DVB/ATSC card DVB: registering new adapter (cx88[0]) DVB: registering adapter 0 frontend 0 (Conexant CX24116/CX24118)... cx24116_firmware_ondemand: Waiting for firmware upload = (dvb-fe-cx24116.fw)... cx24116_firmware_ondemand: Waiting for firmware upload(2)... cx24116_load_firmware: FW version 1.22.82.0 cx24116_firmware_ondemand: Firmware upload complete LNB Voltage SEC_VOLTAGE_13 LNB Voltage SEC_VOLTAGE_18 I also tested this patch: http://hg.kewl.org/v4l-dvb/raw-rev/8d6d8974b33d but without any change. Any hints whats going wrong here ? -- = Helmut Auer, helmut@helmutauer.de = _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb