From: H. Peter Anvin Date: Fri, 02 Jan 2009 11:35:50 -0800 Subject: [ath9k-devel] tip - Solution of ath9k: turn off temporarily (66b5c4a2c638b5a69d3e41abe4a2bae55035a92e) In-Reply-To: <3f9a31f40901021040l2afb5e19sc37e61d3f9728531@mail.gmail.com> References: <3f9a31f40901020936l4bed87e2jb64678572d2ad45b@mail.gmail.com> <20090102180730.GA10072@elte.hu> <3f9a31f40901021040l2afb5e19sc37e61d3f9728531@mail.gmail.com> Message-ID: <495E6C96.3040102@kernel.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org Jaswinder Singh Rajput wrote: >> >> diff --git a/drivers/net/wireless/ath9k/Kconfig b/drivers/net/wireless/ath9k/Kconfig >> index c43bd32..b849a45 100644 >> --- a/drivers/net/wireless/ath9k/Kconfig >> +++ b/drivers/net/wireless/ath9k/Kconfig >> @@ -1,6 +1,8 @@ >> config ATH9K >> tristate "Atheros 802.11n wireless cards support" >> depends on PCI && MAC80211 && WLAN_80211 >> + # build failures >> + depends on 0 >> select MAC80211_LEDS >> select LEDS_CLASS >> select NEW_LEDS >> > I thought the proper way to do this was "depends on BROKEN"... -hpa