Return-path: Received: from [195.7.61.12] ([195.7.61.12]:44976 "EHLO killala.koala.ie" rhost-flags-FAIL-FAIL-OK-OK) by vger.kernel.org with ESMTP id S1752700AbZBKJx7 (ORCPT ); Wed, 11 Feb 2009 04:53:59 -0500 Received: from [127.0.0.1] (killala.koala.ie [195.7.61.12]) (authenticated bits=0) by killala.koala.ie (8.14.0/8.13.7) with ESMTP id n1B9bqhG016561 for ; Wed, 11 Feb 2009 09:37:52 GMT Message-ID: <49929D6D.1000507@koala.ie> Date: Wed, 11 Feb 2009 09:42:05 +0000 From: Simon Kenyon MIME-Version: 1.0 To: linux-media@vger.kernel.org Subject: failure of Cinergy Hybrid T USB XS on amd64 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: does anyone know what is going on here? i know the device works because i can use it on my eee 900 running gentoo however i get a failure to load the driver (hg pull as of yesterday) on two different linux boxes. they are both running gentoo on an amd64 uname -a gives: Linux newyork 2.6.27-gentoo-r8 #1 SMP PREEMPT Wed Feb 11 00:10:13 GMT 2009 x86_64 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ AuthenticAMD GNU/Linux and this is the output from the driver load: usb 2-1: new high speed USB device using ehci_hcd and address 4 usb 2-1: configuration #1 chosen from 1 choice em28xx: New device TerraTec Electronic GmbH Cinergy Hybrid T USB XS @ 480 Mbps (0ccd:0042, interface 0, class 0) em28xx #0: Identified as Terratec Hybrid XS (card=11) em28xx #0: chip ID is em2882/em2883 tvp5150' 2-005c: chip found @ 0xb8 (em28xx #0) tuner' 2-0061: chip found @ 0xc2 (em28xx #0) em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 42 00 50 12 5c 03 6a 32 9c 34 em28xx #0: i2c eeprom 10: 00 00 06 57 46 07 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 00 00 00 em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00 em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 32 03 43 00 69 00 em28xx #0: i2c eeprom 70: 6e 00 65 00 72 00 67 00 79 00 20 00 48 00 79 00 em28xx #0: i2c eeprom 80: 62 00 72 00 69 00 64 00 20 00 54 00 20 00 55 00 em28xx #0: i2c eeprom 90: 53 00 42 00 20 00 58 00 53 00 00 00 34 03 54 00 em28xx #0: i2c eeprom a0: 65 00 72 00 72 00 61 00 54 00 65 00 63 00 20 00 em28xx #0: i2c eeprom b0: 45 00 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00 em28xx #0: i2c eeprom c0: 69 00 63 00 20 00 47 00 6d 00 62 00 48 00 00 00 em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x41d0bf96 em28xx #0: EEPROM info: em28xx #0: AC97 audio (5 sample rates) em28xx #0: 500mA max power em28xx #0: Table at 0x06, strings=0x326a, 0x349c, 0x0000 xc2028 2-0061: creating new instance xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner firmware: requesting xc3028-v27.fw xc2028 2-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 xc2028 2-0061: Loading firmware for type=BASE (1), id 0000000000000000. xc2028 2-0061: Loading firmware for type=(0), id 000000000000b700. SCODE (20000000), id 000000000000b700: xc2028 2-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000. em28xx #0: Config register raw data: 0x50 em28xx #0: AC97 vendor ID = 0x83847652 em28xx #0: AC97 features = 0x6a90 em28xx #0: Sigmatel audio processor detected(stac 9752) tvp5150' 2-005c: tvp5150am1 detected. em28xx #0: v4l2 driver version 0.1.1 em28xx #0: V4L2 device registered as /dev/video1 and /dev/vbi1 zl10353_read_register: readreg error (reg=127, ret==-19) em28xx #0/2: dvb frontend not attached. Can't attach xc3028