Return-path: Received: from mail1.ewetel.de ([212.6.122.13]:45393 "EHLO mail1.ewetel.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753865AbZCFUi1 (ORCPT ); Fri, 6 Mar 2009 15:38:27 -0500 Received: from [192.168.1.5] (dyndsl-091-096-011-129.ewe-ip-backbone.de [91.96.11.129]) by mail1.ewetel.de (8.12.1/8.12.9) with ESMTP id n26H7gJk016874 for ; Fri, 6 Mar 2009 18:07:43 +0100 (CET) Message-ID: <49B1585E.8060005@ewetel.net> Date: Fri, 06 Mar 2009 18:07:42 +0100 From: Hartmut MIME-Version: 1.0 To: linux-media@vger.kernel.org Subject: Not able to view HD-TV via Technisat Skystar HD 2 Content-Type: text/plain; charset=ISO-8859-15 Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: Hi, since 4 days I have a Technisat Skystar HD 2 in my Computer (PCI-card). OS is Opensuse 11.0 (kernel 2.6.25) without vdr but with Kaffeine as frontend. I installed the multiproto-mantis driver (via hg clone and so on) and got the card working, so I can watch dvb-s with Kaffeine. But: not dvb-s2! Perhaps I got the wrong version of scan, but scan works (scan -a 1 -x 0 -t 1 /usr/share/dvb/dvb-s/Astra-19.2E > ~/.szap/channels.conf), but does not find any s2-channels. I tried some versions of dvb-utils and patches, but none were done by make and I have no clue, where to get the right versions of both. I've read about some options which could be given to the modules, but I don't know which and how, the card starts (only now by hand) with modprobe mantis and both the STB-modules come up too. (Attention: there ist a dvb-t-reciever too which makes adapter0, see lsmod)) ******** /sbin/lspci -vv 00:09.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV PCI Bridge Controller [Ver 1.0] (rev 01) Subsystem: Device 1ae4:0003 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- >> >>> tune to: 12580:v:0:22000 DVB-S IF freq is 1980990 WARNING: >>> tuning failed!!! >>> >>> tune to: 12580:v:0:22000 (tuning failed) DVB-S IF freq is 1980990 WARNING: >>> tuning failed!!! ******** tail -f /var/log/messages Mar 6 17:03:27 Jupiter kernel: mantis stop feed and dma Mar 6 17:03:29 Jupiter kernel: stb6100_set_bandwidth: Bandwidth=51610000 Mar 6 17:03:29 Jupiter kernel: stb6100_get_bandwidth: Bandwidth=52000000 Mar 6 17:03:29 Jupiter kernel: stb6100_get_bandwidth: Bandwidth=52000000 Mar 6 17:03:30 Jupiter kernel: stb6100_set_frequency: Frequency=1980990 Mar 6 17:03:30 Jupiter kernel: stb6100_get_frequency: Frequency=1980966 Mar 6 17:03:30 Jupiter kernel: stb6100_get_bandwidth: Bandwidth=52000000 +++++++++ plus another 9 times +++++++++ Mar 6 17:04:32 Jupiter kernel: mantis start feed & dma I inserted Anixe HD by hand into the channels.conf and zapped: ******** szap2 -a 1 -t 2 -r -n 1 reading channels from file '/home/hartmut/.szap/channels.conf' zapping to 1 'ANIXE HD': sat 0, frequency = 11914 MHz H, symbolrate 27500000, vpid = 0x05ff, apid = 0x0603 sid = 0x0084 Delivery system=DVB-S2 using '/dev/dvb/adapter1/frontend0' and '/dev/dvb/adapter1/demux0' do_tune: API version=3, delivery system = 2 do_tune: Frequency = 1314000, Srate = 27500000 do_tune: Frequency = 1314000, Srate = 27500000 which made the output of dmesg: mantis stop feed and dma stb6100_set_bandwidth: Bandwidth=47125000 stb6100_get_bandwidth: Bandwidth=48000000 stb6100_set_frequency: Frequency=1314000 stb6100_get_frequency: Frequency=1314008 (and nothing more) What should I try? Where should I look for? Regards, Hartmut