Return-path: Received: from mx3.redhat.com (mx3.redhat.com [172.16.48.32]) by int-mx1.corp.redhat.com (8.13.1/8.13.1) with ESMTP id n2VCMx3f004723 for ; Tue, 31 Mar 2009 08:22:59 -0400 Received: from smtp.ozonline.com.au (pilbara.ozonline.com.au [203.23.159.213]) by mx3.redhat.com (8.13.8/8.13.8) with ESMTP id n2VCMbZA012761 for ; Tue, 31 Mar 2009 08:22:38 -0400 Received: from [192.168.1.100] (adsl-syd-4-214.ozonline.com.au [210.4.231.214]) by smtp.ozonline.com.au (8.13.7/8.13.7) with ESMTP id n2VCMZJN028766 for ; Tue, 31 Mar 2009 23:22:36 +1100 Message-ID: <49D20B0B.1030701@australiaonline.net.au> Date: Tue, 31 Mar 2009 23:22:35 +1100 From: john knops MIME-Version: 1.0 To: video4linux-list@redhat.com Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: No scan with DViCo FusionHDTV DVB-T Dual Express List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: video4linux-list-bounces@redhat.com Errors-To: video4linux-list-bounces@redhat.com List-ID: I'm using the DViCo card with Ubuntu 8.10amd64. I've followed the various instructions for installing drivers and firmware viz:- loaded the drivers(v4l-dvb-b44a3aed3d1.tar.gz) as suggested on www.linuxtv.org/wiki/index.php/DViCo_FusionHDTV_DVB-T_Dual_Express from linuxtv.org/hg/~stoth/v4l-dvb. I also had to load gspca_m5602.ko in /lib/modules/2.6.27-11-generic/kernel/drivers/media/video/gspca. The card wasn't auto-loaded until I added "options cx23885 card=11" to /etc/modprobe.d/options. I obtained xc3028-v27.fw.tar.bz2 via ubuntuforums.org then copied the untarred file xc3028-v27.fw to /lib/firmware. Dmesg on startup shows that the card is recognised:- 11.290571] cx23885 driver version 0.0.1 loaded [ 11.290620] cx23885 0000:01:00.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28 [ 11.291316] CORE cx23885[0]: subsystem: 0000:0000, board: DViCO FusionHDTV DVB-T Dual Express [card=11,insmod option] [ 11.569588] input: i2c IR (FusionHDTV) as /devices/virtual/input/input6 [ 11.628464] ir-kbd-i2c: i2c IR (FusionHDTV) detected at i2c-0/0-006b/ir0 [cx23885[0]] [ 11.629459] cx23885_dvb_register() allocating 1 frontend(s) [ 11.629461] cx23885[0]: cx23885 based dvb card [ 11.724553] xc2028 0-0061: creating new instance [ 11.724555] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner [ 11.724559] DVB: registering new adapter (cx23885[0]) [ 11.724561] DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)... [ 11.724818] cx23885_dvb_register() allocating 1 frontend(s) [ 11.724820] cx23885[0]: cx23885 based dvb card [ 11.725365] xc2028 1-0061: creating new instance [ 11.725366] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner [ 11.725368] DVB: registering new adapter (cx23885[0]) [ 11.725370] DVB: registering adapter 1 frontend 0 (Zarlink ZL10353 DVB-T)... [ 11.725612] cx23885_dev_checkrevision() Hardware revision = 0xb0 [ 11.725617] cx23885[0]/0: found at 0000:01:00.0, rev: 2, irq: 28, latency: 0, mmio: 0xf7e00000 [ 11.725622] cx23885 0000:01:00.0: setting latency timer to 64 Results of Dmesg after scanning with Mythtv:- [34883.840269] xc2028 0-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000. [34884.981848] xc2028 0-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [34884.995517] xc2028 0-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [34885.025353] xc2028 0-0061: Incorrect readback of firmware version. [34885.278433] xc2028 0-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000. [34886.418714] xc2028 0-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [34886.432409] xc2028 0-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [34886.465353] xc2028 0-0061: Incorrect readback of firmware version. [34887.319906] xc2028 0-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000. [34888.462715] xc2028 0-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [34888.476385] xc2028 0-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [34888.509359] xc2028 0-0061: Incorrect readback of firmware version. [34888.762430] xc2028 0-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000. [34889.901843] xc2028 0-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [34889.915511] xc2028 0-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [34889.949353] xc2028 0-0061: Incorrect readback of firmware version. Any ideas why I'm getting " Incorrect readback of firmware version" What have I missed/done wrong? Thanks......... -- video4linux-list mailing list Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list