From: Oliver Ford Date: Tue, 07 Apr 2009 13:51:13 +0100 Subject: [U-Boot] iPAQ 21x support (+PXA3xx NAND flash and MMC) In-Reply-To: <20090407112947.GA14671@buzzloop.caiaq.de> References: <49314BAD.1020002@oliford.co.uk> <20081129142548.GB23785@buzzloop.caiaq.de> <49315AB3.8010606@oliford.co.uk> <20090407112947.GA14671@buzzloop.caiaq.de> Message-ID: <49DB4C41.3070702@oliford.co.uk> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Daniel Mack wrote: > Hi Oliver, > > getting back to this ancient thread now as I just got back to this > project. > ... > > Very cool - this helped me a lot and works well on a PXA303 board. > Thanks again. Did you try any further to bring this upstream? > > > Good to hear it helped and no, I've not even looked at getting the ipaq stuff into either the mainline kernel or u-boot. I don't really have the time to even read the u-boot mailing list posts let alone commit to merging it. > And would you share the relevant parts of your config, especially those > which define the environment storage? > Iirc, I have it set with no environment but just set a big boot command to set it all up. The ipaq214 config is here: http://www.oliford.co.uk/hpipaq214/public/u-boot/ipaq214.h (ignore the other files in that dir) and my u-boot git tree is here if you want anything else: http://www.oliford.co.uk/hpipaq214/u-boot.git/ It also now has in there MMC/SD and basic keypad and LCD support for the PXA310. Let me know if there's anything else you want. Oliver