Received: from mx1.redhat.com (mx1.redhat.com [172.16.48.31]) by int-mx1.corp.redhat.com (8.13.1/8.13.1) with ESMTP id n3NCIC16015544 for ; Thu, 23 Apr 2009 08:18:12 -0400 Received: from extmail.tilak.at (extmail.tilak.at [193.171.79.34]) by mx1.redhat.com (8.13.8/8.13.8) with SMTP id n3NCHxNb018108 for ; Thu, 23 Apr 2009 08:17:59 -0400 Message-Id: <49F07888020000CF0004DE8C@tilak.at> Date: Thu, 23 Apr 2009 14:17:44 +0200 From: "=?ISO-8859-1?Q?Arthur=20ME=DFNER?=" Mime-Version: 1.0 Content-Disposition: inline Content-Transfer-Encoding: 8bit Subject: [linux-lvm] CLVM mirror LV Recovery Reply-To: LVM general discussion and development List-Id: LVM general discussion and development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , List-Id: Content-Type: text/plain; charset="us-ascii" To: linux-lvm@redhat.com Hello, We have two Datacenters with two HP EVA Storage Arrays. We installed RH Cluster ( two Nodes ) and presented each Node 50GB from each Storage Array. Then created PV, VG and mirrored LV on top of this. ( formatted the resulting Block Device with GFS2 ) If i simulate Storage Failure ( unpresent LUN ) the Disk access will stuck for about 1 Minute, then restarts. Seems OK, but the failed PV is removed from the VG. Linear LV, no more mirror available. Storage 1 | Storage 2 LUN 1 | LUN 2 ---------------------- Fabric A and Fabric B ---------------------- NODE 1 | Node 2 LUN1, LUN2| LUN1, LUN2 PV1 , PV2 | PV1 , PV2 VG | VG LV-MIRROR | LV-MIRROR How can i readd this PV, and get a consistent mirrored LV ? I supposed that the LV resyncs after the failed PV is reactivated, was this a false assumption ?