Return-path: Received: from brigitte.telenet-ops.be ([195.130.137.66]:34650 "EHLO brigitte.telenet-ops.be" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750772AbZEXJCd (ORCPT ); Sun, 24 May 2009 05:02:33 -0400 Message-ID: <4A190BFA.6050007@bsc-bvba.be> Date: Sun, 24 May 2009 10:57:30 +0200 From: Luc Brosens Reply-To: dvb3@bsc-bvba.be MIME-Version: 1.0 To: =?UTF-8?B?QlJVTkVUT04gQsOpcmFuZ2Vy?= CC: linux-media@vger.kernel.org, linux-dvb@linuxtv.org, tarik.chougua@yahoo.fr Subject: Re: [linux-dvb] Hauppauge WinTV-CI References: <965444.24352.qm@web26902.mail.ukl.yahoo.com> <20090515231650.56d6c4f4@bk.ru> <4A164E9F.1070302@bsc-bvba.be> <18d12a680905220950w5ac161f4gd2c716b84bc71cf5@mail.gmail.com> In-Reply-To: <18d12a680905220950w5ac161f4gd2c716b84bc71cf5@mail.gmail.com> Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sender: linux-media-owner@vger.kernel.org List-ID: BRUNETON Béranger wrote: >> I have been struggling for ages with this device, trying get the firmware to load. >> >> The program I wrote to extract the firmware from the driver now outputs the Intel Hex format too, used by fxload. >> No luck : the A3 part does not get loaded, not even using fxloads' A3-loader >> >> Details and downloads of code, logs etc at http://www.bsc-bvba.be/linux/dvb >> >> I could use some help, like : >>>> traces of the firmware being loaded on XP/Vista (I am using USBspy myself), preferably using a hardware protocol analyser >>>> recommendations for an affordable hardware USB2 protocol analyser (I'd try to compare the XP-log with the non-working Linux log) >>>> suggestions on how to proceed ... > > > Do you know why it doesn't support S2 channels ? > Hardware or software limitation ? > > > Regards > I don't have much in the way of DVB-expertise, but here goes : 1) WinTV-CI doesn't participate in getting the signal, so changes in tuners/modulation standards/... etc shouldn't bother it 2) It is a USB2-device so should have the raw bandwidth to handle a HDTV stream 3) It uses the smartcard you'd use normally, so the actual decryption is done with the same hardware so I'd venture it's a software limitation. Luc