From: Marcos Cunha Date: Mon, 31 Aug 2009 10:16:17 -0300 Subject: [U-Boot] [Fwd: Re: mpc8315 DDR2 controller] Message-ID: <4A9BCD21.7040200@atlantico.com.br> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dears, I found the problem. The reference board (MPC8315ERDB) has 128MB DDR2. The new design has 256MB DDR2. I chanced the size macros in \incluce\configs\MPC8315E.h #define CFG_DDR_SIZE 256 /* MB */ #define CFG_DDR_CS0_BNDS 0x0000000F But I forgot change MMU configurations. Below the correct configuration. #define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M| BATU_VS | BATU_VP) Thanks, Marcos Cunha Electrical Engineer Wolfgang Denk wrote: > Dear Marcos Cunha, > > In message <4A944EE0.1000700@atlantico.com.br> you wrote: > >> I am using u-boot 1.2.0 for mpc8315e processor with BDI2000 debugger in >> a new design based on MPC8315ERDB. Our board has a different DDR2 and >> Flash memory. The flash memory works fine. The problem could be DDR2. >> > > U-Boot 1.2.0 is more than 2 years old. > > You really should not use such ancient stuff for a new design. > > You get the expected reply: please update, use current code and try > again. If the problem still persists, please report back. > > Best regards, > > Wolfgang Denk > > -- cid:image002.gif at 01C8B04F.DE139770 *Marcos Aur?lio pinto cunha, PMP Engenheiro eletricista / electrical engineer *** cid:image002.gif at 01C8B04F.DE139770 cid:image003.gif at 01C8B04F.DE139770 Fone: +55 (85) 3216.7934 Fax: +55 (85) 3216.7864 Skype: marcos.cunha.ufc *ISO 9001 : 2000 - CMMI3*** *www.atlantico.com.br *** -- cid:image002.gif at 01C8B04F.DE139770 *Marcos Aur?lio pinto cunha, PMP Engenheiro eletricista / electrical engineer *** cid:image002.gif at 01C8B04F.DE139770 cid:image003.gif at 01C8B04F.DE139770 Fone: +55 (85) 3216.7934 Fax: +55 (85) 3216.7864 Skype: marcos.cunha.ufc *ISO 9001 : 2000 - CMMI3*** *www.atlantico.com.br ***