From: Robert Hancock Date: Sun, 20 Sep 2009 18:19:54 +0000 Subject: [lm-sensors] [PATCH] coretemp: add support for Core i5 CPU Message-Id: <4AB6724A.1060702@gmail.com> List-Id: References: <4AB5DE1F.1020004@gmail.com> In-Reply-To: <4AB5DE1F.1020004@gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-kernel , lm-sensors@lm-sensors.org Cc: r.marek@assembler.cz Add coretemp support for Core i5 (Lynnfield) CPUs with model 0x1E. Signed-off-by: Robert Hancock --- This minimal patch works to add support for these CPUs, though we should likely still look into using the CPUID flags instead of the model check. diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c index 93c1722..a9a21dc 100644 --- a/drivers/hwmon/coretemp.c +++ b/drivers/hwmon/coretemp.c @@ -413,11 +413,11 @@ static int __init coretemp_init(void) for_each_online_cpu(i) { struct cpuinfo_x86 *c = &cpu_data(i); - /* check if family 6, models 0xe, 0xf, 0x16, 0x17, 0x1A */ + /* check if family 6, models 0xe, 0xf, 0x16, 0x17, 0x1A, 0x1E */ if ((c->cpuid_level < 0) || (c->x86 != 0x6) || !((c->x86_model = 0xe) || (c->x86_model = 0xf) || (c->x86_model = 0x16) || (c->x86_model = 0x17) || - (c->x86_model = 0x1A))) { + (c->x86_model = 0x1A) || (c->x86_model = 0x1E))) { /* supported CPU not found, but report the unknown family 6 CPU */ _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors